Correct Use Of Terminal Blocks Can Prolong Life

When using wiring terminals, they must be used and stored correctly to avoid unnecessary troubles.

When receiving the connector, we must carefully observe the outer packaging to see if there is any obvious damage, and also to see if the connector itself is damaged, etc., and we must ensure that we see it. The connector is intact, so that it will not affect our use of the machine.

When you don't use the connector for the time being, don't place the connector arbitrarily, especially in a sunny place. If you forget to place it due to negligence, the connector will be damaged due to long-term sunlight exposure. Affect its use, and even present safety incidents, so we must carefully remember where the connectors can be stored, and must not present safety incidents due to negligence.

Connectors are not allowed to be placed in high temperature places. Continuous high temperature or high humidity will damage the connectors, especially in the environment with chemicals, the connectors will be corroded, and the metal protective layer on the outside will lose its protection. The effect of the formation of the destruction of the current line inside, without the normal conductive function, it becomes a waste.

When you need to move the connector, don't panic. Be careful to avoid the connector from touching hard objects and causing damage to the connector. Don't put it under heavy objects to avoid crushing the connector.

There is another enemy of the connector, that is, grease-like objects. If you touch the grease-like objects during storage or use, the wire connector will also lose its original function and become an obstacle that affects our work.